Micro Vibe

My Micro Hobby Projects

  • Increase font size
  • Default font size
  • Decrease font size
Micro Vibe

Third Release of MV4th16 Ver 0.92

Print
With version 0.92 MV4th16 has become a stand alone development environment. MV4th16 no longer supports the use of Parallax spin code after start up, instead all code is now written in MV4th16 forth and Propeller chip assembly language. MV4th16 forth has been reworked to add; better Propeller chip integration, faster compile and execution speed, better use of limited chip global memory, faster base I/O functions, auto run at start up, as well as many changes and bug fixes to the core library. Some of the key changes are listed in the article MV4th16 Version 0.92 .
Last Updated on Sunday, 03 June 2012 09:24 Read more...
 

Second Release of ForthTerm Program

Print
 
This release of the ForthTerm terminal program is version 2.0. The ForthTerm program is a Windows terminal program (com port, and TCP) and Forth source code and block file editor. The ForthTerm program can be used to ease development for the MV4th16 project.
Last Updated on Tuesday, 27 November 2012 10:44 Read more...
 

Removed Forums And Site Registration

Print
I have removed the site forums and user registration from the web site. The web site forums were not being used to any great extent and where a magnet for spam sites trolling for email addresses. The web site registration was only used to control who could post to the forums, with the forums removed from the site there is no reason to create a site account. All of the site articles and downloads can be accessed without logging into this site.
 
Please feel free to post your questions and comments to the This e-mail address is being protected from spambots. You need JavaScript enabled to view it  email address.
Last Updated on Tuesday, 14 December 2010 11:28
 

Site Down For Three Weeks

Print
This site was down for past three weeks due to a router failure. The router failed just as I had left home for three weeks and I had no way to repair the site from my remote location. The router in question was a 5 year old D-Link 804 series. I found an old D-Link 704 and used it to get the site back up when I got back home. Normally when a D-Link router fails the power supply dies in this case the router itself died. I apologize to anyone trying to access this site during this period.
Last Updated on Friday, 20 January 2017 09:54
 

Getting Started With MV4th16

Print

This article provides general information on using the current release of MV4th16 Forth for the Parallax Propeller chip. To get started you will require a Parallax Propeller target device such as a Parallax "Proto Board" or a "Proto Board USB" or equivalent. The MV4th16 demo can be configured to use a 64K or 128K I2C eeprom or an SD card as the block device. The console device is implemented as a two wire async serial port using the same pins as the Prop Plug.

Last Updated on Monday, 08 February 2016 12:31 Read more...
 


Page 4 of 8